XYZprinting da Vinci 1.0 Pro

Easy to use if it's not broken

Kept breaking ; Rafts were fused ; Software was subpar

The XYZ Printing da Vinci 1.0 Pro Is No Longer Available as of Early 2020 REASONS TO BUY Easy to use if it's not broken REASONS TO AVOID Kept breaking Rafts were fused Software was subpar The da Vinci 1.0 Pro is a subpar machine that appears to be very...

When it works its OK

Many, many failed prints Print bed levelling issues Feeding issues Heated bed but still need tape which is not ideal

Value for money,the software is simple to use and quite good. The print quality seems fair for a fff printer. spend some time and money on kapton tape and the print will holds down well.

The build quality of the 3D printer. It very poor I spent 3 hours calibrating the thing only to find that one of the axis had moved a bit of a nudge and it was working fine. To me shows how not very robust the printer is. But for low priced printer...

When it works it is fantastic. And, for the money this is a great printer. However, I have had many problems you need to be aware of. It will take some time and effort to get this printer working perfectly.

Spent first 2 weeks dealing with *many* problems, especially extruder feeder issues. There is a design flaw that XYZ could easily fix but have chosen not to. Search on youtube for "ULTIMATE DA VINCI PRO MOD FEEDER FIX" and follow that before you do...

Easy to setup and start printing, quality quite good for the cost of the printer,

Speed of prints, wifi ? usb does not work with Mac and xyz pro software but works with S3D, support can be slow.

The only good point about this printer is they're popular, so you can find plenty of other people with the same problems. Very good print quality, on the VERY RARE occasion you can get anything to stick.

First off, there's nothing "PRO" about it, the software is very buggy and super limited compared to the open source slicer software available for all other printers on the market. The first day i got the machine, i couldn't use it because of a door...

I have two xyz printers the pro and the junior. The Junior was a great printer to practice with but only used Pla material. The pro lets me print in more materials ie nylon, abs and Pla. Either from xyz other a third party supplier. Its bigger and...

None really.

Fantastic piece of kit very good value compared to other printers with the same spec, the added laser engraver is also fantastic

Speed is really the only down side, but saying that it is silly slow.

easy enough to use once you get past the set up instructions , and now seems to operate well but was confusing at first

Bigger than i had imagined

Easy to use, very little setup required just check the bed level is correct, and you are good to go. You can use 3rd party filaments and this saves money. Warranty service in the UK is pretty good.

Although you can adjust the hot end temperature, it does not reach more than 225c so you can only use filament upto that temperature. Print speed is a little slow but most prints come out very well.